All you wanted to know about fast loading – Qualcomm Quick Charge

If you have a smartphone in your pocket, you won’t be surprised if you have luggage in your other pocket. The smartphone devices, as good as they are, are not small batteries and require us to load the devices every few hours. Qualcomm Company is the leading manufacturer of mobile processors today and has developed a fast charging standard that knows to provide in just a few minutes of charging for several hours of use. We have come to order you and explain everything you wanted on charging for your device.


How does cargo work? A little technical background
There are many types of freight on the market when each of them has its own technical specifications that are often expressed in two main data – volts (V) and Ampere (A). A product of both will give the wat (energy consumption) that the cargo provides. As a rule, the higher the Watt, the faster it is to load the devices that support it. As an example, a charger that delivers 5 volts and 1 amps, will provide energy consumption of 5 * 1 = 5 watts.
Walt is actually the strain of the luggage. The outlets we have at home provide voltage of 220 volts, but our mobile devices usually use a voltage of 5 volts. The charger converts the high voltage to low voltage (as well as the alternative stream to direct current). In cases of rapid loading there is use of a slightly higher voltage when the charger combined with the electronics on the smartphone, knew to take the correct strain and amp for the device to load it without compromising the health of the battery.
Ampere is the stream provided by the charger. Standard charger provides 1 ampere (or 1,000 milliamps, MAH) namely 5 watt energy (volt * ampere = Watts). The USB ports from the computer, as an example, provide some relative energy for charging (about 2.5 watts total), and a bit more of the USB 3.0 standard that you receive 900 mah (4.5 watts). If so far they’ve put the laptop on the computer and didn’t understand why the loading is so slow – that’s why.

 

The quick Charge of Qualcomm
because of billions of devices that demanded charging, a standard was created to “order” in the loading world. Qualcomm has developed various standards-2.0 3.0 4.0, which many companies have adopted and transformed into a kind of formal charge certificate. A device basically allows the fastest charge the battery can withstand without overheating and without compromising its quality. The various devices of the Qualcomm company attest to a higher load capacity as a device is higher, for example-Standard 2.0 allows the loading of 24 watts with a micro-USB connection to more than 60 watts on the new USB Type C connection. The device monitors the Volt, the amps, and the temperature to allow the loading of devices in a meaningful short time while maintaining device health and user safety.
The company’s 3.0 standard has become even smarter and uses real-time detection of the energy required for the battery to load in the most efficient way. This allows for faster loading of 2.0 facility while saving some energy.
Quick Charge 4.0 That was shown this year is faster than 15 percent to the outgoing-generation stand. Standard 4.0 allows you to use 5 hours on your device after only 5 minutes of charging. It also maintains the battery and gives it 30 percent more life than previous generations. Part of the reason that the new device is so effective is that according to the company’s claim, they have invented an innovative technology that detects real-time temperature in the power and changes at any moment the energy supplies, allowing the phone to cool down if necessary.
The advantage of a unified standard is that there are countless manufacturers of complementary accessories for smartphones of all types – cargo to home, car, mobile batteries, etc., and we cannot know the quality of the accessory we purchased. Adopting a device by the manufacturers indicates a quality stamp and compliance with the device that we have not had so far. Qualcomm enables the “magic” because it is the manufacturer of mobile processors currently leading, and uses components within the processors to enable rapid loading, or it provides smart components for companies that do not use its processors.

 

Important tips for safe and fast
loading
do not use your device during charging – the recommendation is to allow the device to load quickly without interference what is reflected in a significant rapid charge and less abrasion to the battery. Some manufacturers also limit electronic charging when the device is used to not “adopt” the battery over the size.
Use original chargers and cables provided with your device – when a company supplies you with a product with luggage and cable, chances are the best accessories for it. It is true that there may be other chargers that will be well-suited, but the manufacturer’s quality and compatibility control will generally be better. Sometimes there are no high-quality cables that can damage the quality of the charge, and even transferring the data, you should have the original cable.
Listen to your device – did you use a foreign charger and the device was very heated or not loaded as you used to? It’s better not to use it. There is a risk that the charge does not provide the proper voltage, so keep your device and wait for the original luggage in your home or car.
Do you have a few minutes next to a voltage source and need as much battery as you can? Put your device in flight mode and let it recharge uninterrupted as long as you can. As we noted, there are chargers that allow for 5 hours of charge only after 5 minutes of charging, so take advantage of emergency charging time wisely.

To our range of cargo.

יש לכם שאלה?